Mod. 6609d-6612d:
Automatic Forms Cutter
13.12.2006
-45-
Service
routine
no.
Function
Display when a
service routine is
started
Comments
027 3)
Motor test 12V
001-255
display range
Motor test: use the extension to plug motor into ejector socket, and with your
hand hold the pulley still. If the pulley makes jerky movements this is an
indication of faulty winding.
028 4)
Temperature sensor
001-255
display range
The numbers in the display correspond to the following room temperatures:
145 20 C; 150 30 C; 160 40 C; 170 50 C;
From number
154 (corresponds to 35 C) onward, the feed rate will
automatically be reduced in steps.
030
Clear display RAM
OK
Caution:
When this service no. is started, all programs are erased.
031
Erase OMR routines 2-6
OK
Caution:
When this service no. is started, all OMR routines (2-6) are erased.
OMR routine 1 is a fixed program and will be reloaded when the machine is
switched on (even after erasing).
032
to
036
Erase one OMR routine
OK
E.g. Service no. 032 erases OMR routine 2.
Service no. 033 erases OMR routine 3, etc.
OMR routine = service no. minus 30
038
Find beginning of paper
after program change
see service routine 9
table N
The paper is repositioned automatically on the blade edge when the program
is changed.
039
Do not search for
beginning of paper after
program change
see service routine 9
table N
The paper is
not
repositioned automatically on the blade edge when the
program is changed.
040
to
043
Dsplay OMR code
Current cycle
000-255
display range
040 = the first 8 OMR marks, 041 = the next 8 OMR marks , etc. The same
applies to service nos. 044-047, 048-051, etc.
Example: Service no. 040 and display 017
017 is composed of 001 + 016. Thus OMR marks have been detected in line
1 (1) and line 5 (16) (binary addition of the marks). The adjustment line (AL)
contains the first mark.
044
to
047
Display OMR code
1 sheet before
000-255
display range
048
to
051
Display OMR code
2 sheets before
000-255
display range
052
to
055
Display OMR code
3 sheets before
000-255
display range
056
to
059
Display OMR code
4 sheets before
000-255
display range
060 2)
061 2)
062 2)
063 2)
OMR sensitivity level 0
OMR sensitivity level 1
OMR sensitivity level 2
OMR sensitivity level 3
000
001
002
003
000 = low sensitivity (recommended for
90% of all applications
).
Can be checked again in service routine 009 (2/F). The new sensitivity level
will be transferred only after the machine is switched on again.
003 = high sensitivity
064 4)
065 4)
Match code
Match code
see service routine 9
table N
The group match code must be programmed, it will not be output directly.
The group match code will be read in lines 4-16
without
programming and
will be output directly.
066 4)
067 4)
Eject last sheet (>8")
Not eject last sheet
see service routine 9
table N
The last cut sheet (> 8") is transported off the Automatic Forms Cutter and
put to the ONLINE-Systems. Sheets < 8" remain in the Automatic Forms
Cutter - they were not ejected.
The last cut sheet (< oder > 8") is not ejected - remains in the Automatic
Forms Cutter.
2) Only for forms cutters with new main board (no pots.)
3) Only for forms cutters with central computer chip "
H..... 42/94"
4) Only for forms cutters with central computer chip "
H.....47/95"