Mod. 6609d-6612d:
Automatic Forms Cutter
13.12.2006
-36-
Conversion Table 2: Convert function into 5-digit n umber
Function (Fnc)
5-digit number
Müller online equipment to be activated
00001
End of group, enveloping, stapling, eject
00002
Collect (Accumulator)
00004
Deflect (Deflector Unit 1), see a)
00008
Deflect (Deflector Unit 2), see a)
00016
Deflect (Deflector Unit 3), see a)
00032
Deflect (Deflector Unit 4), see a)
00064
Free (e.g. selective)
00128
Free (e.g. selective)
00256
Change direction (cross transport)
00513
Change direction (Transversal Accumulator), see b)
01024
Dual action (cross transport)
02048
Group will be stapled if digi-switch for staple reverse in staple
module 6760/6766 is set at position 5,6,7.
04096
Free
08192
Free
16384
Block Deflection, see a)
32768
Stop
a) Block Deflect:
Block Deflection can be performed by any Müller 6630 deflector unit. The hinged cover of the first def lector unit after
the cutting machine is opened by function 16384 and stays open until function 00001 = End of group is recognised.
In the same way, cross transport 6691 and block Def lection (function 16384) are activated until End of group (function
00001).
b)Transversal Accumulator:
For the Transversal Accumulator, function 00513 is: Eject group from machine.
(00512 for Change dir 00001 for Eject).
c) Stream stacking:
Lengthwise group separation is obtained with functi on 00003 (00002 + 00001).
d) Cut at mark:
If you wish the machine to make a cut at a particular mark, first select OMR routine 7 and enter the definition for the
adjustment line "AL" (the "AL" triggers cutting).