manualshive.com logo in svg

Muller 6609, Operating Instructions Manual, Page: 14 / 55

Share
Download
Muller 6609 Operating Instructions Manual Download Page 14

Mod. 6609d-6612d: 

Automatic Forms Cutter

13.12.2006

-14-

The PROG and INFO buttons have no function during continuous operation.

 3.1.2 Panel keys 

The 4 panel keys have the following functions: 

PROG 

The PROG button switches between the functions 

program

 selection and 

parameter

 selection.

INFO 

The INFO button gives information referring to this instruction manual.
If the OMR system is used during STOP the code is d isplayed. 
(For service functions see Section 3.1.5).

START 

This button starts the machine. 

STOP 

When the STOP button is pressed, the machine will stop at the end of the current cycle. 

3.1.3 Display messages 

The following messages can appear on the display: 

PAPER ???

If there is no paper in the forms cutter the word P APER ??? will appear in the lower display and
the machine will stop. The forms cutter also stops at the end of the paper. 

COVER ???

If  the transparent cover is opened or even just sl ightly lifted during operation, the lower display
will show COVER ??? and the machine will stop at the end of the current cycle. 

READY !!!

This message appears after the paper has been positioned at the blade edge before starting
the machine. When the 

Start

 button is then pressed, continuous operation begin s. 

CALL SERVICE

If a 3-digit number (e.g. 031) is shown, this is a sign of malfunction. Make a note of the 3-digit
number and inform the service technician. (For service messages see Section 3.4.2), 

INTERFACE

The interface connection on the machine or on an additional machine is defective. The service
technician should be informed. 

ID-CHIP

The ID-chip on the main board is missing or is defective - inform service technician. 

COOLING FAN

The filter needs cleaning. 
Additional fan defective (applies to model 6611/6612 only) - inform service technician. 

ADJUST 

When using the OMR system (the adjustment line is w ithin the groove of the reading head) the
reading head can now be adjusted. For further information see Section 

Reader. 

READ ERROR 

The code that has been detected is shown in the lower window on the display 
(e.g. 

0000000001001001

). For further information see Section 

Reader/Read errors. 

STOP

Appears when the 

Stop 

button is pressed. 

       

Summary of Contents for 6609
























































Reviews:

No comments