Operating job computer on the field
Controlling the application
6
30322453-02-EN
V4.20191001
27
> (
)
You have 2 options for starting and stopping the application:
▪
Using a configured sequence
A sequence defines which function of the slurry tanker is performed for how long when you start
or stop the application.
▪
Manual
You must manually activate all functions of the slurry tanker when you start or stop the
application.
Application using a pre-set sequence
A sequence is configured.
1.
- Ensure that you are not in manual application mode.
⇨
The following icon may
not
appear in Area 1:
2.
- Start application.
⇨
You can see the current status by the icons:
for Application started and
for
Application stopped.
3.
Apply the slurry.
4.
- Stop the application after finishing work.
Manual application
1.
- Activate the manual application mode.
⇨
The following icon appears in Area 1:
2.
- Start application.
⇨
You can see the current status by the icons:
for Application started and
for
Application stopped.
3.
Activate the desired functions successively. You can see the possible functions at the end of this
section.
4.
Apply the slurry.
5.
- Stop the application after finishing work.
6.
Deactivate the desired functions successively. The following functions are possible:
▪
Opening and closing the application valve [
Procedure
Procedure
