Seite - 4 - Copyright Müller-Elektronik GmbH u. Co. UNI-Control S Installation and User´s Guide (01/95)
1
Summary
[
1
]
UNI-Control S computer (art. no.: 302531); with chip card (art. no.: 302532).
[
2
]
Tractor plug (at the back)
Connects tractor signal distributor with the tractor-specific sensors.
[
3
]
Machine plug on the UNI-Control S
Connects switch box to machine adapter.
[
4
]
Machine plug on the switch box or on the machine adapter. Connection to UNI-Control S.
[
5
]
Switch box (art. no.: see price list)
Operating panel of the attached machines (e.g. field sprayer) with connection to UNI-Control S.
[10]
Bracket profile slide (art. no.: 312228)
Receiver for the UNI-Control S computer and the switch box or machine adapter.
[11]
Leading channel
for UNI-Control S and the switch box or machine adapter.
[12]
Binding screws
to secure the computer, the switch box or machine adapter.
[13]
Bracket S (Art.-No.: 312226 (incl. profile slide [10]))
Holds die profile slide.
[14]
Computer console (art. no.: 312227)
Mounted to the tractor cabin. Includes the bracket with profile slide and battery connection fo
the switch box or the machine adapter.
[15]
Battery connection cable (art. no.: 312155)
for the voltage supply to the switch box or machine adapter. Connection to the 12-volt battery.
[16]
Tractor signal distributor S (art. no. see price list)
Junction box for the tractor-specific sensors and the battery connection cable.
[17]
Battery connection cable for the voltage supply to the UNI-Control S.
[18]
Sensor Y (Working position) (art. no.: 312089)
to record the working position (z. B. at the 3-point hydraulics).
[19]
Power take-off shaft rotation sensor (art. no.: 302580)
to record shaft speeds at rpm.
[20]
Sensor X (cardan shaft / wheel) (art. no.: 312580)
to record the forward speed, impulse taken from the cardan shaft or front wheel of the tractor.
[21]
Radar device (art. no.: 302583)
for non-slip speed recording.
[22]
Plug for tractor signal socket
Takes signals from the sensors already installed on the tractor.
[23]
Plug for tractor signal socket
Takes signals from the sensors already installed on the tractor. (ISO -11786)
www.ROLTRONIK.pl
