background image

Copyright Müller-Elektronik GmbH u. Co.       UNI-Control S Installation and User´s Guide  (01/95)      Seite - 31 -

                       |  \------------------\-----+
                       |
                       v
                       |
                Enter kilograms
                       |
                       v   /-----------------/-----+
+-------------------------/-----------------/      |                 Left:
| C a l i b r a t i o n   |                 |  T1  |                 After the bin has been filled the
|-------------------------|-----------------|------|                 spreader is shut off. The weight is
| I m p u l s e / k g     |                 |  T2  |                 determined and entered via the
decimal
|-------------------------|-----------------|------|                 keyboard.
|       3 1 5 0   I m p . |                 |  T3  |
|-------------------------|-----------------|------|
|         1 2 , 5 0   k g |                 |  T4  |
+-------------------------\-----------------\      |
                       |   \-----------------\-----+
                       |
                       |
          After pressing the  "input" key
                       |
                       |
                       v   /-----------------/-----+
+-------------------------/-----------------/      |                 Left:
|   M a c h i n e         |          M e nu |  T1  |---> Ms          After pressing the  "Input" key
|-------------------------|-----------------|------|                 the computer calculates and displays
the
| I m p u l s e s/ k g    |                 |  T2  |                 impulses/kg rate. The operation
process
|-------------------------|-----------------|------|                 can now be started. The spread rate
can
|                         |                 |  T3  |                 be adjusted via the + / - keys 10%
|-------------------------|-----------------|------|                 degrees in relation to the pre-set
rate.
|       2 6 2 , 5 0       |         N e x t |  T4  |--------+
+-------------------------\-----------------\      |        |
                           \-----------------\-----+        |        Right:
                                                            |        Press the T1 key for the menu
selection.
                                                            |
                                                            v

Data block OPERATION

                                                            |
                       +------------------------------------+---(Op)
                       |
                       v   /-----------------/-----+                 Left:
+-------------------------/-----------------/      |                 Here interesting data concerning the
|       6 , 8 k m / h     |         M e n u |  T1  |---> Ms          operation process is displayed:
|-------------------------|-----------------|------|                 speed, current application rate,
|                         | T e r m i n a t |  T2  |--->             adjusted deviation from the pre-set
|-------------------------|-----------------|------|                 rate, the remaining working width,
where
|     3 2 0   k g / h a   |           B i n |  T3  |--->             one or several boom sections have
been
|-------------------------|-----------------|------|                 closed.
| + 1 0 %   6 , 0   m     |         N e x t |  T4  |---+
+-------------------------\-----------------\      |   |             Right:
                           \-----------------\-----+   |             Press the T2 key to save the recorded
                                                       |             data
                                                       |             Press the T1 key for the order data
                                                       |             Press the T3 key for the bin capacity
                                                       |             display as in the field sprayer
program
                                                       |             Press the T4 key to proceed to the
next
                                                       |             display.
                       +-------------------------------+
                       |
                       |
                       v   /-----------------/-----+
+-------------------------/-----------------/      |                 Left:
|   5 1 , 5   k g / m i n |         M e n u |  T1  |---> Ms          Displays the current spread rate in
|-------------------------|-----------------|------|                 kg/min
|                         |                 |  T2  |
|-------------------------|-----------------|------|                 Right:
|                         |                 |  T3  |                 Press the T1 key for the order data
|-------------------------|-----------------|------|                 Press the T4 key to proceed to the
next
|                         |         N e x t |  T4  |---> Ms          display.
+-------------------------\-----------------\      |
                           \-----------------\-----+

www.ROLTRONIK.pl

Summary of Contents for 302531




































Reviews: