background image

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.

This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -

 Standard Practice for Treestand Instructions

 and TMS 02 - 

Standard Test Method for Treestand Fall Arrest Systems.

attEntIon!! 

WHEn You sEE a “  WarnInG!” BE surE to HEED tHE MEssaGE! 

tHE InForMatIon contaInED In tHEsE MEssaGEs can saVE Your lIFE!!

11

InstallInG Your FrEEstanDInG PlatForM trEEstanD In tHE FIElD

 WARNING!

 Never attempt to hunt from an unlevel platform. Additionally, never attempt to level your freestanding platform treestand at heights above 

the ground. If you find your platform is unlevel, canted or angled awkwardly upward or downward, or in any configuration other than level, readjust your 

freestanding platform treestand as necessary to alleviate this awkward angle.  Failure to follow these instructions may result in serious injury or death!

 WARNING!

 

You must have three (3) total adults to install or remove your freestanding platform treestand. Failure to follow these instructions may result in 

serious injury or death!

stEP 1.

 With the help of two (2) other adults, gently lift the platform of the freestanding platform treestand and walk it up until erect (Fig. 1). 

stEP 2. 

Check to make sure the platform is on secure and level ground and the standing and seating platforms are level. If the platform is unlevel, adjust the 

bottom legs until the platform is level (as directed in these instructions). 

notE:

 Holes are provided in the feet to allow for staking (i.e., anchoring) to the ground 

for additional safety. Extreme precaution shall be used to ensure that the stand is stable prior to climbing. We suggest the use of (3-5) hammer in stakes as well 

as (2-4) auger style stakes, all sold separately.

 WARNING!

 

Never attempt to level a platform by inserting, or using scrap lumber, rocks, tree limbs or branches, cardboard, or any other material(s). Under no 

circumstances shall you attempt to level your platform in a manner other than described in this Instruction Manual. Failure to follow these instructions will result 

in serious injury or death! 

 WARNING!

 

You must secure your freestanding platform treestand to preclude it from tipping or shifting during installation and/or use. Failure to follow these 

instructions may result in serious injury or death!

rEMoVInG Your FrEEstanDInG PlatForM trEEstanD FroM tHE FIElD

 WARNING!

 

You must have three (3) total adults to install or remove your freestanding platform treestand. Failure to follow these instructions may result in 

serious injury or death!

stEP 1.

 With the help of two (2) other adults (three [3] total) slowly tip the freestanding platform treestand and walk it down to the ground.

STORAGE AND CARE OF YOUR STAND

Your new Muddy® freestanding platform treestand is factory finished with a state-of-the-art powder coating that guarantees years of trouble-free service. 

It is recommended that you store your freestanding platform treestand out of direct sunlight and out of any other harsh environmental condition(s) 

that may adversely affect its performance.

FIG. 1

Summary of Contents for The Renegade MQP1500













Reviews: