attEntIon!!
WHEn You sEE a “ WarnInG!” BE surE to HEED tHE MEssaGE!
tHE InForMatIon contaInED In tHEsE MEssaGEs can saVE Your lIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -
Standard Practice for Treestand Instructions
and TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems.
8
Shooting
Rail Covers
Shooting Rail
Shooting
Rail Foam
Shooting
Rail Covers
Shooting
Rail Foam
Shooting
Rail Covers
Shooting
Rail Foam
Platform Mat
Roof
Supports
Roof
Supports
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A A
Roof-Tops
Roof-Side
Roof-Side
Roof-Tops
stEP 9.
Attach a
roof-side
to the inside of the two
roof supports
using (4) 1/4” x 1 3/4” hex bolts [A], (8) nylon washers and (4) 1/4”
nylock nuts. Repeat for opposite side. Next, connect the
roof-sides
by attaching the
roof-tops
to the underside of the
roof-sides
and
secure using (10) 1/4” x 1 3/4” hex bolts [A], (10) nylon washers and
(10) 1/4” nylock nuts (Fig. 9).
stEP 10. sEcurElY
tIGHtEn all nuts
anD Bolts at tHIs
tIME.
stEP 11.
Attach the
shooting rail foam
and
covers
to the
shooting
rail
(Fig. 10). Carefully slide the
canopy
over the
roof assembly
(maintaining even pressure while pulling down the canopy over the
edges and corners of the roof). Ensure the entry opening is on the
same side as the
front foot platform
and secure by attaching
bungee
hooks
to the underside of the
foot platform
(Fig. 11).
Top Legs
E
E
E
E
E
E
Bottom Legs
Brace
Brackets
Brace
Brackets
Brace
Brackets
Brace
Brackets
Brace
Brackets
Brace
Brackets
FIG. 12
lEG assEMBlY
stEP 12.
Connect the (3)
top legs
to the (3)
bottom legs
by using
(6) 5/16” x 2 1/4” hex bolts [E], (12) nylon washers and (6) 5/16” nylock
nuts.
notE:
The
brace brackets
on each
leg
shall be facing the same
direction, to the inside, when assembled correctly (Fig. 12).
WarnInG! Do not
attempt to set-up this or any other Muddy®
product(s) when thunderstorms are threatening and/or present within
five (5) miles (8 km).
Do not attempt
to set-up this or any other Muddy®
product(s) when any other adverse weather condition presents itself.
These include weather conditions which have the potential for producing
winds, lighting, rain, snow, sleet and/or any other atmospheric condition
which may limit the user’s ability to set-up this Muddy® product(s) in a safe
manner as described in this Instruction Manual. Shall inclement weather
conditions arise during your use of this Muddy® product(s), discontinue
set-up of this Muddy® product(s) and immediately seek shelter.
Failure to
follow these instructions may result in serious injury or death!
Canopy
Bungee
Hooks
Entry
Opening
Bungee
Hooks
FIG. 11
FIG. 10
FIG. 9
