READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 -
Standard Practice for Treestand Instructions
and TMS 02 -
Standard Test Method for Treestand Fall Arrest Systems.
attEntIon!!
WHEn You sEE a “ WarnInG!” BE surE to HEED tHE MEssaGE!
tHE InForMatIon contaInED In tHEsE MEssaGEs can saVE Your lIFE!!
9
E
Leg Support
Leg Support
Leg
Leg Support
Leg Support
Leg
Leg
Step Leg
E
E
E
E E
E E
Top Step Leg
Entry Step
Standard Steps
Standard Steps
Bottom Step Leg
F
F
F
F
F
F
F
F
F
F
F
F
F
F
stEP 13.
Insert the
top step leg
into the
bottom step leg
aligning holes. Then,
attach the (6)
standard steps
and the
entry step
using (14) 5/16’’ x 2 1/2’’ hex bolts
[F], (28) nylon washers and (14) 5/16’’ nylock nuts to secure (Fig. 13).
stEP 14. sEcurElY tIGHtEn all nuts anD Bolts at tHIs tIME.
FIG. 13
E
Leg Support
Leg Support
Leg
Leg Support
Leg Support
Leg
Leg
Step Leg
E
E
E
E E
E E
Top Step Leg
Entry Step
Standard Steps
Standard Steps
Bottom Step Leg
F
F
F
F
F
F
F
F
F
F
F
F
F
F
QuaD-PoD assEMBlY
stEP 15.
Lay the platform on its back. Attach the (4) assembled
legs
to the
leg supports
using (8) 5/16” x 2 1/4” hex bolts [E], (16) nylon washers and (8) 5/16” nylock nuts, ensure the
x-support brackets are to the inside.
notE:
The
step leg
must be attached to the
leg support
beneath the
canopy entry door
(Fig. 14).
FIG. 14
