Item
Color
Inscription
Meaning / Function
8
White
DIM ↓
Holding down the button decreases LCD back‐
ground illumination.
9
White
LAMP TEST
Pressing the button initiates lamp test.
10
Red
TEST OVERSPEED
Pressing the button initiates overspeed test.
LED (spot) lights up as long as the overspeed
test is running.
11
Green
(depending on type of
gearbox and propulsion)
FPP: Pressing the button engages gear ahead.
CPP, WJ, VS: Pressing the button engages
clutch.
LED (spot) lights up when GCU feedback is ac‐
tive.
12
Green
FPP, CPP, WJ, VS: Pressing the button disen‐
gages clutch.
LED (spot) lights up when GCU feedback is ac‐
tive.
13
Green
FPP: Pressing the button engages gear astern.
CPP, VS: No function assigned.
WJ: Holding down the button provides flushing of
water jet intake channel (water-jet reverse) .
LED (spot) lights up when GCU feedback is ac‐
tive.
14
White
ENGINE SPEED IN‐
CREASE
Engine speed is increased as long as the button
is held down.
15
White
ENGINE SPEED DE‐
CREASE
Engine speed is decreased as long as the button
is held down.
16
Green
READY FOR OPERA‐
TION
Pressing the button switches between "Not ready
for operation" and "Ready for operation".
LED (spot) is illuminated when the button is in the
"Ready for operation" position.
17
Green
LOCAL CONTROL
Pressing the button switches between local oper‐
ation and remote control.
LED (spot) lights up when local mode is active.
18
White
START
Pressing the button initiates the automatic engine
start sequence.
LED (spot) lights up as long as the starting proce‐
dure is running.
19
White
STOP
Pressing the button initiates automatic engine
stopping procedure.
LED (spot) lights up as long as the STOP signal
is available (also if transmitted from RCS).
20
Red
EMERGENCY STOP
Pressing the button initiates an immediate emer‐
gency engine stop.
LED (spot) flashes once the emergency stop has
been tripped and until the alarm has been ac‐
knowledged.
MW15412/05E 2011-11 | Operation | 87
TIM-ID: 0000008861 - 002
