Removing turbine housing
Note:
Mark positions of housing in relation to one
another.
1.
Remove nuts (2) from turbine housing (4).
2.
Remove nuts (2) with spacer sleeves (3).
3.
Remove turbine housing (4) from bearing
housing (1).
Checking turbine housing
1.
Check turbine housing from the inside for
cracks.
Note:
Cracks are only permissible in the direction
of circumference of the spiral.
2.
Length of crack exceeding max. crack
length: (x= 30 mm) or transverse cracks:
Replace turbine housing.
Installing turbine housing
1.
Remove all covers.
2.
Mount turbine housing (4) according to
marking on bearing housing (1).
3.
Screw on nut (2) with spacer sleeve (3).
MW15412/05E 2011-11 | Task Description | 147
TIM-ID: 0000013060 - 002
