9.
Use slotted screwdriver to check thrust ring
at both line ends for secure seating.
10.
Tighten loose thrust ring to the specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Thrust ring
Tightening torque
5 Nm to 10 Nm
11.
Coat screw head mating face (2) and
thread with engine oil.
12.
Place hold-down clamp (1) in correct installation position. Tighten screw (2) with torque wrench to the
specified initial tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M12
Preload torque
(Engine oil)
5 Nm to 10 Nm
13.
Fit O-rings (4) and (6) on high-pressure fuel line (5) and coat with grease.
14.
Tighten high-pressure fuel line (5) to the specified initial tightening torque.
Name
Size
Type
Lubricant
Value/Standard
HP line
Preload torque
(Engine oil)
5 Nm to 10 Nm
15.
Tighten screw (2) to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Screw
M12
Tightening torque
100 Nm + 10 Nm
134 | Task Description | MW15412/05E 2011-11
TIM-ID: 0000000952 - 004
