MTU 8V4000M*3 series, Operating Instructions Manual

Page: 121 / 260

343 – AL Open Load Cylinder A3
ZKP-Number: 1.8004.542
Cause Corrective action
Disruption fault in injector cabling
to cylinder A3. Result: Misfiring 1. Check continuity of injector cabling or exclude open load in
solenoid valve circuit (e.g. by injector replacement)
2. Error clearance: After each working cycle.
344 – AL Open Load Cylinder A4
ZKP-Number: 1.8004.543
Cause Corrective action
Disruption fault in injector cabling
to cylinder A4. Result: Misfiring 1. Check continuity of injector cabling or exclude open load in
solenoid valve circuit (e.g. by injector replacement)
2. Error clearance: After each working cycle.
345 – AL Open Load Cylinder A5
ZKP-Number: 1.8004.544
Cause Corrective action
Disruption fault in injector cabling
to cylinder A5. Result: Misfiring 1. Check continuity of injector cabling or exclude open load in
solenoid valve circuit (e.g. by injector replacement)
2. Error clearance: After each working cycle.
346 – AL Open Load Cylinder A6
ZKP-Number: 1.8004.545
Cause Corrective action
Disruption fault in injector cabling
to cylinder A6. Result: Misfiring 1. Check continuity of injector cabling or exclude open load in
solenoid valve circuit (e.g. by injector replacement)
2. Error clearance: After each working cycle.
347 – AL Open Load Cylinder A7
ZKP-Number: 1.8004.546
Cause Corrective action
Disruption fault in injector cabling
to cylinder A7. Result: Misfiring 1. Check injector wiring for disruption or rule out any discontinuity in
the solenoid valve (e.g. by replacing the injector)
2. Error clearance: After each working cycle.
348 – AL Open Load Cylinder A8
ZKP-Number: 1.8004.547
Cause Corrective action
Disruption fault in injector cabling
to cylinder A8. Result: Misfiring 1. Check injector wiring for disruption or rule out any discontinuity in
the solenoid valve (e.g. by replacing the injector)
2. Error clearance: After each working cycle.
MS15034/00E 2018-08 | Troubleshooting | 119
TIM-ID: 0000018389 - 004