MTU 8V4000M*3 series, Operating Instructions Manual

Page: 20 / 260

2 Transport
2.1 Transport
Transport
Attach the engine at the lifting eyes provided only.
The lifting eyes are designed for engine transport only, not for the transport of propulsion units (engine and
gearbox).
Use only the transport and lifting gear approved by MTU.
The engine must only be transported in installation position, max. permissible diagonal pull 10°.
Take note of the engine center of gravity.
In the case of special packaging with aluminum foil, suspend the engine on the lifting eyes of the transport
pallet or transport with equipment for heavy loads (forklift truck).
Prior to transporting the engine, it is imperative to install transportation locking devices for crankshaft and
engine mounts.
Secure the engine against tilting during transportation. The engine must be especially secured against slip-
ping or tilting when going up or down inclines and ramps.
Setting the engine down after transport
Place the engine only on an even, firm surface.
Ensure appropriate consistency and load-bearing capacity of the ground or support surface.
Never place an engine on the oil pan, unless expressively authorized by MTU on a case-to-case basis to do
so.
18 | Transport | MS15034/00E 2018-08
TIM-ID: 0000002621 - 004