Engine oil filter replacement
with the engine running
1.
To cut out the filter to be replaced, set the
three-way cock (2) to the corresponding
position.
a Both filters cut in (operating posi-
tion)
b Right-hand filter cut out
c Left-hand filter cut out
Result:
The oil filter is isolated from the oil circuit
but still under pressure.
2.
Connect vent hose to threaded vent plug
(1) of the cut-out oil filter. Place the end of
the hose in the container provided.
3.
Turn threaded vent plug (1) counterclock-
wise by one revolution.
Result:
The gauge pressure in the filter housing is
released through the vent hose.
4.
Wait until air no longer escapes from hose.
5.
Use torque wrench to tighten threaded vent plug (1) to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Threaded vent plug
Tightening torque
25±2 Nm
6.
Remove vent hose.
7.
Place open end of oil drain hose in contain-
er.
8.
Remove dust cap from coupling sleeve (1).
9.
Connect quick-release coupling of oil drain
hose to coupling sleeve (1).
Result:
Oil drains from filter housing.
10.
Wait until the oil has completely drained
from oil filter housing via oil drain hose.
11.
Disconnect quick-release coupling of oil
drain hose and remove hose. Close cou-
pling sleeve (1) with dust cap.
MS15029/01E 2015-06
| Task Description | 99
TIM-ID: 0000043553 - 002
