Adjusting valve clearance
1.
Loosen locknut (1) and unscrew adjusting
screw (2) by a few threads.
2.
Insert feeler gauge between valve bridge
and rocker arm (3).
3.
Readjust adjusting screw (2) so that the
feeler gauge just passes through the gap.
4.
Tighten locknut (1) with torque wrench to specified torque, holding adjusting screw (2) firm with Allen
screw.
Name
Size
Type
Lubricant
Value/Standard
Nut
M10 x 1
Tightening torque
43 Nm +4 Nm
5.
Check if the feeler gauge just passes through between valve bridge and rocker arm (3).
Result:
If not, adjust valve clearance.
Final steps
1.
Install cylinder head cover (→ Page 85).
2.
Install plug.
84 | Task Description | MS15022/02E 2012-04
TIM-ID: 0000012219 - 003
