3.7 Fuel treatment system – Switching on
Preconditions
☑ The on-board power supply is switched on.
CAUTION
Damage to engine/plant.
Major material damage!
• Before switching on, ensure that the engine/plant is ready for operation.
• Before switching on, ensure that all housings are closed.
• Before switching on, ensure that no work is in progress anywhere on the entire system.
Switching on fuel treatment system
1.
Carry out checks prior to start-up (→ Page 25).
2.
Switch on master switch on switch cabinet.
Result:
Signal lamp “Control voltage present” lights up.
3.
Switch on switch for pump.
Result:
Signal lamp “Pump running” lights up.
MS150095/01E 2012-08 | Operation | 29
TIM-ID: 0000007731 - 005
