4.
Tighten locknut (1) with torque wrench to the specified tightening torque, holding the adjusting screw (2)
with Allen key to prevent it from turning.
Name
Size
Type
Lubricant
Value/Standard
Locknut
Tightening torque
50 Nm +5 Nm
5.
Insert feeler gauge between valve bridge and rocker arm to verify that the gauge just passes through the
gap.
Result:
If not, adjust valve clearance again.
Final steps
1.
Insert plug screw and tighten.
2.
Remove barring device.
3.
Install cylinder head cover (→ Page 47).
46 | Task Description | MS150095/01E 2012-08
TIM-ID: 0000023895 - 003
