7.5.2 Cylinder-head cover – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Centering device
F6783025
1
Gasket
(→ Spare Parts Catalog)
Preparatory steps
1.
Remove air filter (→ Page 102).
2.
Remove intake housing.
Cylinder-head cover – Removal
and installation
1.
Remove screws (1).
2.
Remove cylinder-head cover (2) with gas‐
ket from cylinder head.
3.
Clean mating faces.
4.
Check condition of gasket of cylinder-head
cover.
Result:
Replace damaged gasket(s).
5.
Center cylinder-head cover (2) with center‐
ing device.
6.
Use torque wrench to tighten screws (1) to
specified torque 20 Nm.
Final steps
1.
Install air filter (→ Page 102).
2.
Install intake housing.
3.
Check cylinder-head covers for leaks.
MS150061/04E 2012-07 | Task Description | 87
TIM-ID: 0000004470 - 001
