7.6.2 Injector – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Socket wrench
0005896803/00
1
Puller
F6790629
1
Double box wrench
F30011450
1
Open end wrench bit
F30025897
1
Box wrench adapter
F30451199
1
Alignment device
F6790507
1
Grease (Kluthe Hakuform 30-10/Emulgier)
X00029933
1
Engine oil
WARNING
Fuels are combustible.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
Preparatory steps
1.
Close fuel supply to engine.
2.
Remove cylinder head cover (→ Page 87).
Removing injector
1.
Remove HP line (5) using socket wrench.
2.
Disconnect injector cable (4).
3.
Remove screw (2).
4.
Take off hold-down clamp (3).
5.
Remove injector (1) with puller.
6.
Remove O-rings from injector.
7.
Mask all connections and bores or seal with
suitable plugs.
MS150061/04E 2012-07 | Task Description | 89
TIM-ID: 0000004650 - 002