MTS Systems Landmark 370 Series, Operation

Page: 93 / 134

Running the Example HCF Test
Landmark™ Test System Operation 93
2. Minimize the Station Manager application.
Click the minimize button in the upper right corner of the Station Manager application.
3. Verify that the Station Manager application is still running by checking for it in the task bar.
You can maximize Station Manager at any time by clicking the Station Manager button in the
task bar.
Run the Example HCF Test
1. Running the example HCF (high cycle fatigue) test consists of the following steps:
A. “Open the MPX Application” on page 94
B. “Select the Test” on page 94
C. “If Necessary, Correct Any Resource Errors” on page 95
D. “Create a New Test Run” on page 95
E. “Run the Test” on page 97
F. “Review the Results” on page 98
G. “Generate a Report” on page 99
H. “Save the Test and Minimize MPX” on page 100