PeroBravo Bedienungsanleitung / Operators Manual
35
Technical Data
•
1-channel stimulator with 20 programs.
•
Intensity 0 - max. 60 mA into 500 ohm or 1000 ohm load, 50 mA maximum into 1500
ohm load (Indication only, actual intensity varies depending on condition of the electrodes)
With monophasic current max. intensity is 40 mA.
•
Power supply: 4 rechargeable (NiMH-)batteries 1,5 V Type AA
•
Voltage max.:130 V without load (70 V into 1000 ohm load)
•
Dimensions: L 141,6 mm x W 74 mm x H 40,4 mm
•
Weight: 275 g (incl. batteries)
Single pulses
:
•
Waveform: monophasic triangular or trapezoidal with continuously changing polarity
•
Pulse width triangle: 1 ms - 1000 ms / Pulse width trapeze: 5 ms - 1000 ms
•
PRG 12: Pulse width monophasic rectangle: 1 ms - 1000 ms
Enveloped pulses:
•
Waveform: biphasic, symmetrical, rectangular or monophasic positive, rectangular
•
Frequency: 1 - 120 Hz
•
Pulse width: 50 µS - 35 ms (positive part)
The
PeroBravo
features a stimulation circuit failure detection system incorporated into the
device and its software. Four pulses with a pulse width and voltage not exceeding 1uS and
6 volts are triggered before each main pulse to check the integrity of the circuit. These pulses
FDQQRWEHIHOWDQGGRQRWHIIHFWWKHHI¿FDF\RIWKHGHYLFH,IDIDLOXUHLVGHWHFWHGGXULQJWKLVWHVW
STIM.FAIL will display on the LCD. If STIM.FAIL is repeatedly displayed on the LCD then
the unit should be returned to the manufacturer for testing. This is an added safety protection
system to ensure each pulse generated by the device is safe for the user.
&ODVVL¿FDWLRQ
Internally powered, constant current, continuous operation, Type BF applied
part, class IIa (MDD 93/42/EEC), IP 20
The expected service life of
PeroBravo
is 10 years. Service life of accessories is one year. The
storage time of the batteries is approximately 2 years and the charging life is about 500 cycles.
The service life (expiry date) of self-adhesive electrodes is printed on each package.
Environmental conditions for storage & transportation: 0-93% atmospheric humidity, -25 to
+70 degree centigrade. Environmental conditions for use: 0-93% atmospheric humidity, +5 to
+40 degree centigrade, air pressure 700-1060 hPa.
7KLVGHYLFHLVTXDOLW\FRQWUROOHGDQGIXO¿OVWKHUXOHVDQGUHJXODWLRQVVHWE\WKH*HUPDQODZIRU
medical products (MPG) as well as the guidelines of the European Community 93/42/EEC for
medical products. Therefore this device carries the CE-sign „CE 0123“. The serial number is in
the battery compartment.
Manufacturer:
MTR+ Vertriebs GmbH,
Kamenzer Damm 78, 12249 Berlin - www.mtrplus.com
