MTHTrains Premier SD50 Diesel Engine Operator'S Manual Download | Manualshive

Page: 46 / 47

background image

Additional Features Accessible With

The DCS Remote Control System

(Additional equipment required)

While conventional mode operation of  a Proto-Sound® 3.0 engine yields wonderfully
realistic sound and several train control features, command mode operation allows the
user to access a world of  command functions never before accessible to O Gauge
railroaders. With the addition of  the DCS Remote Control System (including a DCS
remote handheld and Track Interface Unit) users gain many advanced features,
including:

• DCS Proto-Speed Control - Establishes desired locomotive speed in scale miles
per hour increments via a thumbwheel control and allows operator to set
maximum speed and acceleration/deceleration rates

• ProtoSmoke™ Variable Output Control - Controls how much smoke each
engine outputs and matches smoke to locomotive speed

• Locomotive Lighting Control - Controls locomotive headlights, marker and
interior lights, beacon lights, ditch lights, and MARS lights

• Emergency Stop-Single button push stops all Proto-Sound® 2.0 and Proto-Sound®
3.0 engines but does not turn off the input power to the TIU

• One Touch Global Mute/UnMute-Single button mutes or unmutes all DCS-
controlled locomotives' sounds

• Proto-Dispatch Operation-Public Address-like feature allows users to speak
through locomotive speaker during operation

• Proto-Cast-Allows users to play audio recordings through locomotive speaker
during operation

• Proto-Doppler Sound Effects Set Up-Users can configure locomotive for
Doppler Operation, including setting distance points for Doppler start, repeat,
and stop modes

• Independent Volume Control of Engine Sounds, Bell, Horn & Whistle, and
Accent Sounds for each Locomotive

• Control up to 99 different DCS-Equipped Locomotives at one time with
multiple TIUs

• Proto-Effects™ Set Up-User can select individual Proto-Effects™ operations to
be active or inactive, including cab chatter, train wreck sounds, coupler sounds,
Direction Control Set Up-User can set initial individual start-up direction (start in
forward or reverse) for double-heading operations

•Locomotive Consist Set-up-User can determine locomotive values for consist
make-ups, allowing multiple locomotives belonging to a consist to operate
together

Premier SD50 Diesel Engine

46

«
...
44
45
46
47
»

Summary of Contents for Premier SD50 Diesel Engine
















































Reviews:

No comments

Related manuals for Premier SD50 Diesel Engine

Brand: Old School Model Works Pages: 24

Brand: B Pages: 2

Brand: REVELL Pages: 12

30 model building set

Brand: KNEX Pages: 24

Brand: Black Horse Model Pages: 20

27 percentGee Bee "Y" ARF

Brand: Pacific Aeromodel Pages: 17

2 BEEKEEPER'S TRAILERS

Brand: Faller Pages: 8

Brand: K'Nex Pages: 36

Brand: LEGO Pages: 83

Seahorse Symphony 643415

Brand: Little Tikes Pages: 2

Brand: Haute Decor Pages: 2

Brand: ZAGI Pages: 17

MONOGRAM SHELBY COBRA 427 S/C

Brand: REVELL Pages: 12

Brand: GRAUPNER Pages: 36

Brand: THE WORLD MODELS Pages: 20

GAMETIME HOCKEY RINK

Brand: OYO Sports Pages: 60

Brand: Eduard Pages: 8

Mini HIGHroller

Brand: Team Losi Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands