MTHTrains Premier SD50 Diesel Engine Operator'S Manual Download | Manualshive

Page: 6 / 47

background image

Programming Track (for DCC operation)

Your MTH PS3.0-equipped O Gauge engine can function on Programming Track
outputs from DCC systems. Most DCC systems can support the current requirements
of the engine as long as it’s not started up. If you plan on powering up the MTH engine
on your programming track, you may want to consider a DCC Programming Track
Booster.

Loading Engine Firmware

Your new MTH PS3.0-equipped O-Gauge engine affords you the ability to load Engine
firmware. Loader version 2.30 or later will allow you to do this. Please refer to the
Loader program’s instructions for more details. So, as MTH releases new features or
updates you will be able to take full advantage without having to ship your favorite
engine anywhere. All new updates are available on our website. MTH will make
announcements as they are available. Not all updates will apply to all engines.

NOTE: Requires a TIU w/ version 4.20 or later firmware, and requires
Consumer Loader version 2.30 or later.

LED Lighting

Gone are the incandescent bulbs. Your new PS3.0-equipped engine has LED lighting.
MTH uses various colored LEDs to simulate the correct lighting on your engines from
the warm, yellow-orange colored light coming out of an old lantern on your favorite
steam engine to the high-intensity halogen lamp on the latest modern diesels, LED's
allow for various, correct colors. Also, they require less power and do not emit as much
heat as incandescent bulbs.

Modes of Operation

®

There are 4 options for operating your MTH Proto-Sound 3.0-equipped engine;

• Conventional AC
• Conventional DC
• DCS - MTH Digital Command System
• DCC

When the locomotive is placed on the track and power is applied to the track the
locomotive will detect the type of control system being used and respond accordingly.
Below is an overview of the 4 different systems.

NOTE: You’ll need to have the DCC/DCS switch set correctly if your using one
of those two modes.

Premier SD50 Diesel Engine

6

«
...
4
5
6
7
8
...
»

Summary of Contents for Premier SD50 Diesel Engine
















































Reviews:

No comments

Related manuals for Premier SD50 Diesel Engine

Brand: Gayla Pages: 2

Brand: Jamara Toys Pages: 20

Brand: ubisoft Pages: 21

Brand: Horizon Hobby Pages: 19

Star Wars 75004

Brand: LEGO Pages: 60

Brand: Trends UK Pages: 3

Brand: Radica Games Pages: 2

L.O.L. SURPRISE! O.M.G. ROYAL BEE

Brand: MGA Entertainment Pages: 2

Brand: PIKO Pages: 12

Ultra Micro FPV Vapor

Brand: E-FLITE Pages: 17

Cash Bash Electronic Flash Card LER 6966

Brand: Learning Resources Pages: 4

Brand: Fisher-Price Pages: 16

BATHROOM EQUIPMENT SETS

Brand: Faller Pages: 4

Brand: Fisher-Price Pages: 6

Brand: LGB Pages: 12

Brand: Multiplex Pages: 52

Glimpse BLH2200

Brand: Blade Pages: 24

Ultra Stick Lite

Brand: Horizon Hobby Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands