MTA NGSi 05, Technical Manual, Page: 34 / 58

TECHNICAL MANUAL
Chapter 9
- User - Control Interface
NGSi 05÷15
32
ENGLISH
EN
The data in this manual are not binding and they can be modified by the manufacturer without notice. Reproduction of this manual is strictly prohibited
H10 Domestic hot water
function enabling / 0 0...1 I 0 = function
disabled
1 = function
enabled
H19 ST8 input
configuration
/ 0 0...41 I
0 = input not
assigned
41= water
temperature remote
probe SE-SE Terminals
Input which can be
used in exclusion
of D.I.7 (if used set
H44=0)
H20 ST9 input
configuration
/ 0 0...41 I
0 = input not
assigned
6 = domestic hot
water temperature
41= water
temperature remote
probe SAN-SAN
terminals
Input which can be
used in exclusion
of D.I.8. (if used
set H45=0)
H21 ST10 configuration / 0 0...41 I 0 = input not
assigned
40= 0-10V input 0-10V-0-10V
Terminals
H44
DI7 Configuration
/ 26 0...28 I 0=input not
assigned
26= humidity
switch second
setpoint
28= domestic hot
water temperature
control from digital
mode SE-SE Terminals
Input which can be
used in exclusion
of ST8 (if used set
H19=0)
H45 DI8 configuration
/ 0 0...28 I
0 = input not
assigned
26= humidity
switch second
setpoint
28= domestic hot
water temperature
control from digital
mode SAN-SAN
terminals
Input which can be
used in exclusion
of ST9 (if used set
H20=0)
H54 Digital inputs
polarity / 0 0...255 I 0= digital inputs
polarity= NO
64 = polarity DI7 =
NC (for domestic
hot water
temperature
controller digital
call from SE-SE)
128= polarity
DI8=NC (for
domestic hot water
temperature
controller digital
call from SAN-
SAN)
H58 DO3 configuration
/ 22 0...32 I
0 = input not
assigned
22= system backup
heater
24= alarm
26= domestic hot
water backup
heater
29= hot water tank
31= system season
indication AEHN-AEH
terminals to
connect to the
remote control
switch coil (NO
230Vac contact)
Parameter Description Unit Default Range Visibility Permitted settings Notes