MST ImPact WAP, User Manual

Page: 62 / 88

Wireless Radio and Networking
• wireless.radio.1.* - General wireless radio settings.
•
wireless.radio.1.ap.x.*
- Each WAP can have up to four wireless SSIDs (where "x" is replaced with
1-4), each with different security settings and different VLAN mapping.
•
wireless.radio.1.ap.x.wep.*
OR
wireless.radio.1.ap.x.wpa.*
- WEP/WPA security; only the options
specific to the enabled security mode need be configured.
Wireless EAP Configuration
•
wireless.eap.*
- RADIUS server settings. This is applicable only to wireless networks configured with
WPA Enterprise security mode.
• wireless.eap.x.* - A primary and secondary (backup) RADIUS server can be set up and configured.
The "x" in each parameter should be replaced with "primary" or "secondary".
WDS (Wireless Distribution System)
• wireless.radio.1.wds.* - Allows ImPact network devices to connect wirelessly where a fibre or ethernet
connection is not practical.
• wireless.radio.1.wds.peer.x.* - Up to six peered devices can be configured; "x" is replaced with 1-6.
Revision B 62 Wireless Access Point User Manual
Centralised Configuration Management