MST ImPact WAP, User Manual

Page: 50 / 88

If the Access Point is sending tag reports to an MST Tracker Engine, the Tracker Engine's IP address
must be entered into each Access Point.
There are four sections on the
Tracking
configuration screen:
Enable
Check
Enable Wi-Fi Tracking
to view other settings.
RSSI Lower Thresholds
These settings are used to control what location reports are sent to the Positioning Engine. If a Wi-Fi tag
or mobile unit report is received with an RSSI below the relevant threshold, it is not sent to the Positioning
Engine (whether it is an AeroScout Positioning Engine or MST Tracker Engine). The default threshold
is -95 dBm, but this can be raised or lowered according to specific site conditions and requirements.
Revision B 50 Wireless Access Point User Manual
Configuration Using the Web Interface