MST ImPact WAP, User Manual

Page: 58 / 88

•
Parameter Value:
To edit a parameter, click on the parameter value and either enter a new value (e.g.
names and IP addresses) or select a new value from the dropdown menu (e.g.
ENABLED
/
DISABLED
).
When all required changes have been made, click OK to close the dialog box. The Managed status of
all available parameters can be changed at once using the Manage All and Manage None checkboxes
below the list.
4.1.3 Access Point
Access Points (APs) become visible to the ICA after the map containing them is first synchronised from
AeroScout. Once visible, APs are automatically added to the
List of Access Points
Revision B 58 Wireless Access Point User Manual
Centralised Configuration Management