USER MANUAL V2.2 |
October 10, 2019
29
Select
Disable
to disable random jetting.
NOTES
:
Time for jetting
varies from 10 to 60
,
000 seconds.
This function is useful for Solvent base ink
s
.
W
e recommend any user enable
this function
with
an approximate
time
of
15-30 seconds to help printing quality
when using solvent inks
.
Sensor
Select
External
or
Internal
sensor.
From the
Settings
menu, use the arrow keys to go to
Sensor
and press Enter. Move to your
desired mode and press Enter to confirm.
Direction
Set print direction correlating
with
the direction of the conveyor. Machine supports 4 directions:
: left right,
: right left,
: reverse left right,
: reverse right left.
From the
Settings
menu, use the arrow keys to go to
Direction
and press Enter. Move to your
desired direction and press Enter to confirm.
Print Mode
Sensor
mode and
Continue
mode.
From the
Settings
menu, use the arrow key to go to
Print Mode
and
press Enter. Select
Mode
and
press Enter to select
Sensor
or
Continue
mode.
Sensor mode
Machine is triggered by
a
sensor
to
print.
Go to Mode and press Enter to select
Sensor
mode and use arrow keys to move to other
settings. Input
a
value at
Repeat
to set the number of prints to be repeated on the same
object.
Press Enter to confirm and go to the next setting. Valid values vary from 0 to 99
,
999.
Input
a
value at
Delay
to set distance between the prints. Valid values vary from 10 to
10,000
mm
. Invalid values results in error.
Continue mode
Go to Mode and press Enter to select
Continue
mode and use arrow keys to move to
other settings.
Input value at
Fix length
to set distance between the prints. Valid values vary from 5 to
10,000mm. Invalid values results in error.
Immediate:
print continue without sensor signal.
Level:
print continue with sensor signal.
Unit
Select your desired measurement units
inches
or
mm.
From the
Settings
menu, use the arrow keys to go to
Unit
and press Enter. Move to your
desired measurement
units and
press Enter to select.
Update Font
