USER MANUAL V2.2 |
October 10, 2019
26
ITEMS
DETAIL
Prints
Number of prints
that
have been
made
Ink levels
Current amount of ink in the cartridge (ml)
Speed
Current speed (m/min)
Resolution
Current resolution (dpi)
Stop
Change
the
status of machine from start printing to stop.
To stop print, press ESC to go back to the main screen. Use
or
arrow keys to go
to
Operation
, select Stop to stop printing.
NOTES:
Machine should be stopped before
changing
other settings.
Shortcut key to Start / Stop:
CTRL
+
SHIFT
+
ENTER
.
Purge
Select
Operation
Purge
to jet the ink out from all nozzle
s,
this will help clean the print head.
Connect / Disconnect PC (Coming soon)
Settings
From main menu select
Settings
to access settings menu.
From the Settings menu, use the arrow keys to move the cursor to your desired setting, press
Enter to select and begin
editing
.
NOTES:
Press Enter to save. Press ESC to go to main menu and apply new settings.
Speed
Set print speed
by selecting the correct mode
:
None Enc.
and
Encoder.
None Encoder
Operating
m
achine without encoder. Under this mode, print speed must be set to
synchronize with
the current
conveyor speed
for quality prints
(input value at
Value
).
Encoder
Encoder is recommended where speed of the conveyor varie
s
. Under this mode, print speed
of
m
achine will be synchronized with conveyor speed
in real time
to ensure the best print
quality. Ensure you have an encoder installed with machine via the DB15 connector.
NOTES
:
Minimum speed: 1m/min
Maximum speed: 228m/min at 300x100 dpi
From the
Settings
menu, use
or
arrow keys to move the cursor to
Speed
, press Enter.
Press Enter again at
Select
to choose
None Enc
or
Encoder
mode.
Press Enter to apply
settings.
