USER MANUAL V2.2 |
October 10, 2019
12
INSTALLATION PROCEDURES
See
QUICK GUIDE.
GETTING STARTED
Install the machine on your conveyor according to the installation instructions. See the
Quick
Guide
for more information.
Set print direction and appropriate throw distance to obtain best print quality
(1-3 mm)
.
Insert ink cartridge.
Plug the power cord into an appropriate power source to start up the machine.
Insert keyboard receiver to keyboard port, turn on wireless keyboard.
EXTERNAL DEVICES CONNECTIONS
NOTES:
Machine is able to operate with External Sensor, Encoder,
or
Alarm at a
ny
time. Consult
your
supplier for further support
on the settings and connections.
To connect machine with External Sensor, Encoder, Alarm, etc…, additional connector
DB15 (male) will be required.
EXTERNAL SENSOR
Machine supports NPN, PNP and Push-pull sensor types.
Connect sensor using power supply on machine.
Connect sensor to machine using external power supply.
The
demonstration
below
is for
an
external power supply of 5V.
