USER MANUAL V2.2 |
October 10, 2019
27
Resolution
Set the amount of ink drops
per
inch. From the
Settings
menu, use
or
arrow keys to go
to
Resolution
, press Enter. Select your desired resolution and press Enter.
Optional resolutions with standalone mode:
300x300 dpi.
300x150 dpi.
300x100 dpi.
Optional resolutions with PC mode (Coming soon)
Density
Set the optical density of the print.
There are 5 levels of
Density
to apply.
From the
Settings
menu, use
or
arrow keys to move the cursor to
Density
, press Enter.
Move the cursor to your desired density and press Enter to apply.
NOTES:
Maximum p
rint speed will be varied according to the resolution and the optical density.
Table below is used to explain
the
relationship between: Speed, Resolution and Density.
Density
Resolution
1
2
3
4
5
300x300
76
38
25
19
15
300x150
152
76
50
38
30
300x100
228
114
76
57
45
Delay
Delay
before
print and Delay
after
print (mm).
Delay before print
: set the distance
from when
the sensor receives
a
signal to the start of
printing.
Input value at
Value
, press Enter to apply settings.
Delay after print
: set the distance that the print head will delay after it finish
es
the previous
to accepting a new signal/trigger
. Input value at
Value
, press Enter to apply settings.
NOTES:
Delay before print varies from 1 to 10
,
000 mm.
Delay after print varies from 1 to 10
,
000 mm.
Cartridge
Display the current level of ink in the cartridge (using smartcard).
From the
Settings
menu, use the arrow keys to go to
Cartridge
and press Enter.
NOTES:
Alarm is triggered when there is 5ml left in the cartridge.
Printer will stop print when
displaying
"
warning out of ink
" error message
.
Update Logo
