USER MANUAL V2.2 |
October 10, 2019
20
@ [ \ ] ^ _ ` { | } ~
Logo
Insert logo or image from Machine into message.
Your logo should be updated or setup in the
Settings
menu.
In the input section, press Insert and use
or
arrow keys to move your cursor to Logo and
press Enter. Move your cursor to the desired Logo and press Enter.
NOTES:
Insert logo first, then input message if you need to print a logo at the beginning of the
message.
Input message, then insert logo if you need to print a logo at the end of the message.
Logo should be inserted in the
bottom
line of your message if you are printing multiple
lines to
ensure it is fully printed.
Counter
Insert product counter into the message. There are
Single
and
Box/Lot.
In the input section, press Insert and use
or
arrow keys to move the cursor to
Counter
and press Enter. Select your desired object and press Enter.
Single
Is an independent counter. This is used to count the products printed,
this
can be a product
or a box.
Move the cursor to the each object and input the value. After all values are set, move the
cursor to
Add counter here
and press Enter to insert the counter into the message.
Start
: start number of counter.
Current
: current number that you would like to print immediately.
Reset
: end number of counter.
Step
: count step of counter.
Repeat
: Repeat count of counter.
Up/Down
: direction of counter. Up for increase number, down for decrease number.
Fill zero
: add 0 before each number like 09, 009, 0009…
Add counter here
: insert counter into the message.
