18
Result
Other Commands:
Outlet 1 or 2
Turn ON
Turn OFF
Reset
Back
UIS
Turn ON
Turn OFF
Back
Note*
If you have multiple outlets, just use the same ID (from Get My ID)
3.6. How to Upgrade/ Re-Flash Firmware
When issues occur with your IP switch, it is best to upgrade firmware (if available) or
re-flash the current version of firmware. This can be done with the Utility application
OR via the local web interface page. It can be accomplished with a computer that is
connected to the same network as the IP switch or, in certain cases when the IP
Switch is unreachable, you may connect it directly to your computer via the Ethernet
cable.
NOTE: Before performing the upgrade, it is recommended that your save your
settings. See section 4.4.1 for instructions on the Save/ Restore settings info.
