14
SET ON / OFF / RESET
command will
return a “Done!” once IP Switch has
completed the action.
GET IP
command will return the WAN IP
and the unit’s LAN IP address.
*If port forwarding is set, but not the
domain name, user can still use WAN IP
to access the IP Switch Web User
Interface from internet.
GET STATUS
command will return the
following information.
For
[Outlet Status]
the Outlet1 and
Outlet2 name can be assigned. This is
done via the local IP address of the IP
Switch
...
→
Configuration
→
Configuration
→
Outlet Setup.
*Allow time for the system to respond.
*NOTE: There is also a mobile
application called “Hangouts” that can
be used in this same manner. It is
available for Android and iOS.
3.5. How to Access IP Switch from WAN – Using Skype
As an alternative to the Google Talk/ Hangouts, you can now use Skype to
monitor and control your outlets.
Step 1:
While connected to the same network as the 3Gstore IP Switch, open
a browser and enter this address:
http://outlet
(*only works on windows OS)
otherwise use the IP Address to the switch i.e.
192.168.0.197
or try using the
Utility program ( *Windows only Program)
Step 2:
Admin Screen
1. Select
Save/Upgrade
on the left hand side of the screen
2. In the
Upgrade Firmware
Section under Location Select
Choose File
3. Locate the File you downloaded (usually under downloads)
4. Click
Open
5. Click
Apply
6.
Uploading Firmware
will prompt for a couple of minutes