English
Test bench
20
Figure 22. Installed temperature sensor
4.3. SHOCK ABSORBER DIAGNOSTICS
IN AUTOMATIC MODE
To activate the diagnostic modes it is necessary to press the button «Test turnover», then
«Calibration of the strain gauge» on the screen of the main menu see. pos. 2 fig. 8. After that,
diagnostic modes become active.
WARNING!
At the test speed, the operator’s hand should be on the emergency the bench
disconnection button so that in the event of an emergency, the engine on the bench will stop
instantly.
To switch to the automatic mode of operation of the stand it is necessary to press the button
«Automatic mode».
