English
Operation manual
13
- use extension cords to connect the bench to the electrical network. If the socket is
removed from the site of installation of the bench, it is necessary to make adjustments to
the electrical network and install the socket;
- operation of the bench in defective condition.
- independently to repair and make changes to the design of the bench, because it can lead
to serious damage to the bench and deprive the right to warranty repair.
5. It is forbidden to leave unattended units on the bench with the drive running.
4. SHOCK ABSORBER DIAGNOSIS
4.1. Preparing the test bench and shock absorber for
mounting
Install one of the equipment sets (Fig. 9) corresponding to the type of mounting of the shock
absorber in the lower pneumatic clamp, see Fig. 11. If the top mounting of the shock absorber
has a threaded part, twist the prism on it (Fig. 10).
Figure 9. Interchangeable fasteners for lower pneumatic clamp for various types of shock
absorber anchorages
Figure 10. Prisms for fixing shock absorbers
1
- prisms for fixing shock absorbers with shaft threaded tip (identical);
