MSC CXC-BT
User Manual
53 / 84
Feature
Options
Description
XHCI Hand-off
Enabled, Disabled
This is a workaround for OSes without
XHCI hand-off support. The XHCI
ownership change should be claimed by
XHCI driver.
EHCI Hand-off
Enabled, Disabled
This is a workaround for OSes without
EHCI hand-off support. The EHCI
ownership change should be claimed by
EHCI driver.
USB Mass Storage
Driver Support
Enabled, Disabled
Enable/Disbale USB Mass Storage Driver
Support
Port 60/64 Emulation
Enabled
Disabled
Enables I/O port 60h/64h emulation
support. This should be enabled for the
complete USB keyboard legacy support for
non-USB aware OSes.
USB transfer time-out
1,5,10,20 sec
The time-out value for Control, Bulk, and
Interrupt transfers.
Device reset time-out
10,20,30,40 sec
USB mass storage device Start Unit
command time-out.
Device power-up delay
Auto, Manual
Maximum time the device will take before it
properly reports itself to the Host
Controller. 'Auto' uses default value: for a
Root port it is 100 ms, for a Hub port the
delay is taken from Hub descriptor.
Device power-up delay
Value 1-40
Delay range is 1…40 seconds, in one
second increments.
USB
Mass
Storage
Device ( e.g USB Stick)
Auto, Floppy, Forced FDD,
Hard Disk, CD-ROM
Select Mass storage device emulation
type.
Auto enumerates devices according to
their media format. Optical drives are
emulated as CDROM, drives with no
media will be emulated according to a
drive
Note: This option is appears only if a USB
storage device is connected.
6.3.16 Security Configuration
Feature
Options
Description
TXE
Enabled
Disabled
Enable or disable Intel® Trusted Execution Engine
Note
: Disabling this feature will prevent the extra
powercycle at startup if no RTC is connected.
