MSC CXC-BT
User Manual
38 / 84
5.2 SMB Address Map
Device
Address *
)
ANX1122
50h / 28h
ANX1122
8Ch / 46h
SO-DIMM 0 SPD EEPROM
A0h / 50h
SO-DIMM 1 SPD EEPROM
A2h / 51h
CMOS Backup EEPROM
A8h / 54h
AAh / 55h
Embedded Controller
C0h / 60h
PLX PCIe switch
B0h / 58h
*) 8 bit address (with R/W) / 7 bit address (without R/W)
Note
: It is not recommended to use this bus for customer devices.
BIOS
6.1 Introduction
This guide describes the AMI Aptio Setup Startup screen and contains information on how
to access Aptio setup to modify the settings which control AMI pre-OS (operating system)
functions.
6.1.1 Startup Screen Overview
The AMI Aptio Startup screen is a graphical user interface (GUI) that is included in AMI
Aptio products. The default bios behavior is to show an informational text screen during bios
POST phase, but the graphical boot screen can be enabled in the bios setup. The standard
boot screen is a black screen without any logo.
6.1.2 Activity Detection Background
While the startup screen is displayed, press the Setup Entry key (ESC or DEL). The system
acknowledges the input, and at the end of POST, the screen clears and setup launches.
Note: By pressing [F10] during POST system will display a Boot Menu for directly booting a selected
device.
6.1.3 Aptio Setup Utility
With the AMI Aptio Setup program, you can modify Aptio settings and control the special
features of your computer. The setup program uses a number of menus for making changes
and turning the special features on or off. This chapter provides an overview of the setup
utility and describes at a high-level how to use it.
