MSC CXC-BT
User Manual
58 / 84
6.3.19 Legacy IRQ Reservation
Feature
Options
Description
Reserve IRQ
1,3,4,5,6,7,10,1
1,12
Reserve IRQ
Reserve IRQ
1,3,4,5,6,7,10,1
1,12
Reserve IRQ
Reserve IRQ
1,3,4,5,6,7,10,1
1,12
Reserve IRQ
Reserve IRQ
1,3,4,5,6,7,10,1
1,12
Reserve IRQ
6.3.20 Module-specific Initialization
Feature
Options
Description
User I2C Support
GPIO-based,
Controller based
Select the type of user I2C support. Select GPIO-
based for Windows OS, and controller-based for
Linux.
This is important for the EAPI software to function
correctly.
External SMBus Control Enabled
Disabled
Enable/Disable External SMBus after POST
Shutdown Support
ATX Mode, AT
Mode
ATX Mode means that the system will be turned off
after shutdown. In AT mode, Windows will not
automatically turn off the system, but instead shows
an information message
Watchdog Start on Boot No, Yes
Start the watchdog after BIOS POST if enabled.
Startup Delay
1s,10s,30s,
1min,5min
Select the initial delay value. This is an additional
one-time delay before the standard timeout timer is
started.
Event Timeout
1s,10s,30s,
1min,5min
Select the timeout value after which the watchdog
will perform its timeout event action.
Event Action
Assert WDOUT,
Do Nothing
Select the action that should be initiated after an
event timeout occurs.
Reset Timeout
1s,10s,30s,
1min,5min
Select the timeout value after which the watchdog
will be executing its reset action. This timeout will
start to countdown after the event timeout expired.
Reset Action
Reset System,
Do Nothing,
Assert WDOUT
Select the timeout value after which the watchdog
will perform its reset action. This timeout will start to
countdown after the event timeout expires.
