9
MSA Tool Tethers with Loops
US
6. Place the tape on top of the tether just below the
web end and tightly wrap once around the tool to
secure the tether.
7. Continue wrapping by pulling and stretching the
tape tightly around the tool, overlapping each
time by at least half an inch.
8. Firmly press the end of the tape to the wrapped
tether to seal.
9. Connect to a suitable connector and pull to
ensure the tether is secure.
If using a Tool Tether Detachable Loop, connect
the hook end of the side release buckle to the
insertion end of the buckle on a Tool Tether
Carabiner Detachable Loop.
Summary of Contents for 10207313
Page 5: ...5 MSA Tool Tethers with Loops US Fig 1 Fig 2 Fig 3 Fig 4...
Page 17: ...5 Longes pour outils MSA avec boucles CA Fig 1 Fig 2 Fig 3 Fig 4...
Page 29: ...5 Ataduras de herramientas MSA con lazos MX Fig 1 Fig 2 Fig 3 Fig 4...
Page 41: ...5 MSA Tool Tether Werkzeughaltegurte mit Schlaufe DE Abb 1 Abb 2 Abb 3 Abb 4...
