MRMC MHC CLASSIC Quick Start Manual Download

Page: 9 / 66

MHC (Classic) v3.0 Quick Start Guide

On the receipt of your license file, save it on to the disk, launch
Polymotion Launcher. Click the

Add new licence file

button and select

the new license file. Once the license is added, you will be ready to use the
product.

Powering up a head and the PC

Cable together and power up all heads including camera and lens
motors.

Use the icon on desktop to launch Polymotion
Launcher.

Click/tap

MHC

If you are launching this for the first time, you will be required to
add a new license file or a license code. Contact MRMC Support for
a new license. Refer to

MHC Licensing Information

on page 2.

Once you have supplied a license code, MHC Server and Client are
launched, login to MHC Client as Admin:
Username: Admin
Password: Admin1234

Summary of Contents for MHC CLASSIC



































































Search results

Summary of Contents for MHC CLASSIC

Reviews:

Related manuals for MHC CLASSIC

Brands by name

Popular brands

MRMC MHC CLASSIC, Quick Start Manual

Search results

Summary of Contents for MHC CLASSIC

Reviews:

Related manuals for MHC CLASSIC

Brands by name

Popular brands