MRMC MHC CLASSIC Quick Start Manual Download Page 10

Page: 10 / 66

MHC (Classic) v3.0 Quick Start Guide

Changing system configuration and network
settings

You can click the

Settings

(

) button to display the Settings menu. The

tabs in the menu are:



NETWORK

– Adding/deleting heads and changing head

network settings



PREFERENCES

– Preferences page can be accessed via Admin

login allowing the administrator to set head-specific axis
speeds, limits and homing. For more details on these settings,
refer to Chapter

Preferences Page



CONTROLLER MAPPING

– View and modify functions

assigned to USB joystick controller buttons. Refer to

MHC

User Manual

for further details.



USER

– Add/change user accounts.

The

Settings

menu is different for Administrator and User login. For

more information on Settings menu for the User login, refer to

Settings

menu

on page 14.

Note

At any time, if you need to restart MHC, perform the following steps:

Close the MHC Client and the MHC Server windows.

Double-click or tap the MHC Server desktop icon to launch it.

Double-click or tap the MHC Client icon to launch it. The
MHC Client can be launched on the same or a different
computer present on the same network.

Summary of Contents for MHC CLASSIC



































































Search results

Summary of Contents for MHC CLASSIC

Reviews:

Related manuals for MHC CLASSIC

Brands by name

Popular brands

MRMC MHC CLASSIC, Quick Start Manual

Search results

Summary of Contents for MHC CLASSIC

Reviews:

Related manuals for MHC CLASSIC

Brands by name

Popular brands