MRC DRS2000HS, User And Technical Manual

Page: 24 / 68

Routine Operation 2-10 DRS2000HS/DRS6000HS User and Technical Manual
2.8 Setup Menu Operations
The procedures required to use the Setup menus are contained
in the following steps. All Setup menus are accessed from the
Control menu.
2.8.1 Review Hardware Configurations
The steps required to determine the firmware revisions of the
hardware options contained in your DRS2000HS/DRS6000HS
system are contained in
Figure 2-10 .
Figure 2-10: Review Hardware Configurations
Control menu is
displayed Select Setup and
press OK
Setup Menu is
displayed
Select Hardware
Configuration and
press OK
Hardware
Configuration
menu
is displayed
Review data, as
required, and press
Back until Control
menu is displayed
2.8.2 Select IP, Gateway, and Netmask
Addresses
The steps required to select new IP, Default Gateway, and
Netmask addresses or to review current IP settings are
contained in
Figure 2-11 on page 2-11 .