2
Routine Operation
2-1
DRS2000HS/DRS6000HS
User and Technical Manual
Routine Operation
2.1
Chapter Overview
This chapter provides basic information that will enable you to
operate your DRS2000HS/DRS6000HS Digital Diversity
Receiver.
Here are the topics covered:
Topic
Page
Controls, Indicators, and Connectors
2-1
Front Panel Controls, Indicators, and
Connectors
2-2
Rear Panel Connectors
2-3
Preparing for Operation
2-4
Installation
2-4
Powering the Receiver
2-4
Control Menu Operations
2-5
Keypad Operation
2-6
Routine Operations
2-7
Control Menu Operations
2-7
Change Channel
2-7
Change Frequency
2-8
Change Bandwidth
2-8
Change Video Decoder
2-9
Select a New Preset
2-9
Setup Menu Operations
2-10
Review Hardware Configurations
2-10
Select IP, Gateway, and Netmask Addresses
2-10
Change Use Service Information Mode
2-12
2.2
Controls, Indicators, and
Connectors
Controls, indicators, and connectors contained on the front and
rear panels of the DRS2000HS/DRS6000HS are shown in
Figure 2-1 on page 2-2
.
Review or Change PIDs
2-12
Set Frame Sync
2-14
Enable/Disable Color Bar Generator
2-14
Select RS-232 Data Output Mode
2-14
Select New Service Name
2-15
Select Video Fail Mode
2-15
Select Encryption Mode
2-15
Select/Edit Site Management Name
2-17
Activate Site management
2-17
Select BDC Type
2-17
Complete RCL Calibration
2-19
Perform Firmware Upgrade
2-19
EEPROM Initialization
2-19
Edit/Create Custom Frequency Band
2-20
Change Channel Spacing Password
2-21
Preset Menu Operations
2-21
Add a New Licensed Option
2-22
Remote Operation
2-22
Starting the Web Browser Interface
2-22
Using the Web Browser Interface
2-23
Summary of Contents for DRS2000HS
