5 Mounting
Maschinenfabrik Reinhausen GmbH 2020
107
4983703/01 EN
VACUTAP
®
VV-Ex
6. Grease the coupling bolt, coupling part and shaft end of the bevel gear
(e.g. ISOFLEX TOPAS L32) and insert the coupling bolt into shaft end.
Thread the hose clip onto the square tube and slide the square tube with
the coupling part onto the shaft end.
Figure 98: Sliding the square tube with the coupling part onto the shaft end
7. Secure the square tube onto the bevel gear.
Figure 99: Securing the square tube on the bevel gear
