manualshive.com logo in svg

MR TAPCON 260, Operating Instructions Manual

Share
Download
MR TAPCON 260 Operating Instructions Manual Download Page 114

6 Functions and settings

Maschinenfabrik Reinhausen 2014

114

2374092/04 EN

TAPCON® 260

Figure 75: Retrace time

1

Time

 

To move the sequence to a precise time, proceed as follows:

1.

 > 

 Info > Press 

 until the desired display appears.

ð

Time plotter.

2.

Press 

 until the setting box for the retrace time is highlighted.

ð

The setting box is now highlighted and the value can be changed.

3.

Press 

 to advance the time or 

 to move it back.

ð

The retrace time is set. The sequence for the specified time appears in
the display.

Setting retrace date

This function allows you to display the sequences of measured values for a
time or date you have selected in order to trace how voltage has behaved in
the past.

Any date between the present date and the oldest time in the memory can
be set. The date is entered in the following format: 

DD.MM.YY

Figure 76: Retrace date

1

Date

 

6.14.5.5

Summary of Contents for TAPCON 260









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands