manualshive.com logo in svg

MR TAPCON 260, Operating Instructions Manual

Share
Download
MR TAPCON 260 Operating Instructions Manual Download Page 109

6 Functions and settings

Maschinenfabrik Reinhausen 2014

109

2374092/04 EN

TAPCON® 260

When you set the event memory size, the complete memory is cleared as
soon as you confirm the change.

To set the event memory size, proceed as follows:

1.

 > 

 Configuration > 

 Continue > 

 Continue > 

 Memo-

ry > Press 

 until the desired parameter is displayed.

ð

Event memory.

2.

Press 

 or 

 to set the event memory size you want.

3.

Press 

.

ð

The event memory size is set.

Time plotter

The 

Info

 menu item is where you'll find the time plotter function. The actual

voltage and desired value you have set is displayed here. The units of volt-
age per unit are defined automatically and you can change them at any time.
You can undertake the following settings in the time plotter function:
▪

Division of time axis

▪

Voltage range

▪

Retrace time

▪

Retrace date

The following sections describe how you can access the time plotter.

Visual display of time plotter function

The time plotter is displayed as follows:

 

6.14.5

6.14.5.1

Summary of Contents for TAPCON 260









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands