mr
.
steam
®
C U S E R I E S
Installation, Operating & Maintenance Manual
16
DIGITAL 1
®
CONTROL INSTALLATION
NOTE:
If the steam generator came with a factory installed Digital 1
®
control skip to page 16.
Hazard of Electric Shock.
Disconnect all power supplies before making wiring connections.
NOTE: Reference applicable wiring diagram.
1. Remove 4" diameter blank cover located on steam generator. Mount the Digital 1 faceplate
on the back of the generator cabinet with provided screws and nuts. For one room
installation use the upper blank.
2. Connect the control wires to the bottom of the terminal block above the control.
The terminals are coded with the wire insulation color: Black-White-Black-Brown-Black-White.
3. Refer to applicable schematic for proper wire connections.
Control Panel Showing
Control Panel Showing
One Digital 1
®
Control
Two Digital 1
®
Controls
WARNING
!
