GARDENIC
EN
25
9. USE
NETWORK CONNECTION
Electric hedge trimmers can be powered by single-phase 230-240 V~ 50Hz. They are
double-insulated, which means that they can be operated without a protective
conductor when plugged into sockets.
Before connecting the unit to the mains, check that the mains voltage corresponds
to the operating voltage on the unit's nameplate.
Check the operation of the cutting blades before starting work.
START-UP AND OPERATION
Check the operation of the cutting blades before starting work.
An extension cord is required to operate the unit.
The extension cable should be certified for outdoor use.
The device has a two-handed safety guard (the point is to avoid the possibility of
touching a working cutting blade by hand). With the safety function, the device can only
be switched on when one hand presses the safety switch (3) and the switch on the rear
handle (7) is activated with the fingers of the other hand.
If any of the switches is released, the device is switched off.
Be careful with the work of the cutting bar, the blades do not stop immediately
after switching off.
